
Abatement Technologies Portable Air Scrubber PRED1200UV
Have a question?
Talk to one of our professionals today!
TARIFF ALERT: Prices Increasing Soon - Order Now & Lock In Current Rates!
Have a question?
Talk to one of our professionals today!
The PRED1200UV does more than perform—it’s third-party certified. NRTL-certified and backed, it’s rigorously tested for electrical and filtration safety. Paired with true HEPA filtration, it captures 99.97% of 0.3-micron-sized particles or smaller, delivering peace of mind in sterile environments where compliance counts.
Designed for Jobsite Mobility Its tough exterior accommodates a light-weight interior, so it's a trustworthy portable air scrubber that adjusts rapidly. Whether for mold jobs that require a highly reliable air scrubber portable unit or hospital isolation, the PRED1200UV was designed for mobility, for power, and for lasting performance—all within one quiet enclosure.
Dimensions (L x W x H) | 55.88 x 61 x 106.68 cm (22” x 24” x 42”) |
Air Changes per Hour | 6 ACH @ max 9,000 ft |
Airflow | 300-900 cfm |
Net Weight With Filters | 70 lb |
Shipping Weight | 95 lb |
Power Supply Requirements | 120 VAC, 60Hz, 15 A |
Circuit Breaker | 12 A |
Cabinet Material | UL94HB flame retardant resin with EPA-Registered microbial inhibitor |
Pre Filter Access | Hinged door secured by rotating latches. Full perimeter gasket seals to protect against bypass of dirty air |
Stage 2 Pre-Filter | UV-resistant 2 pleated particulate pre-filter (MERV 8) |
Stage 1 pre-filter | 1 coarse particulate pre-filter (MERV 4) |
Final stage HEPA filter | Long-life true HEPA tested and certified to an efficiency of 99.97% or higher for 0.3 micron particles |
Transportability | Built-in Dolly - Two-wheel dolly consisting of 8 solid, non-marking rubber rear wheels, 360degreeswivel front casters and a secure top handle for gripping |
Lamp Type | UVGI, 39 W total output |
Amperage | 3.5 A or less (Daisy-chain multiple units on one 15 amp circuit) |
Motorized Impeller | Motorized impeller rated for 100,000 hours with thermal overload protection, auto reset, 60Hz, single-phase |
Certifications | NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety |
Third Stage Pre Filter | An internally mounted, 39-W, UVGI lamp located below the pre-filters in a single module |